OK, so you don't have the need to turn your Smart Doll into a mobile battery nor a Miraicon computer cos you already got one - so how about a USB hub then?
The Smart Doll torso was designed to hold a variety of gadgets and hide away wires but there are some folks out there who prefer their cute girls (and guys) with wires sticking out of them - introducing the product that covers this demographic - Smart Doll USB Hub!
Smart Doll USB Hub is an additional add-on available today from our online store. This add-on requires an operation that may require up to an extra 10 business days before shipping.
The Smart Doll girls have two USB 2.0 sockets - the reason why I didn't make them USB 3.0 is because they required an additional wire to power the device.
For folks who face first world problems like the USB sockets being on the backside of an iMac, you can now easily gain access to USB ports via Smart Doll USB Hub.
Mirai-chan in the middle of helping me copy files to a USB memory stick and charging my iPhone.
And this is what your setup may look like with a Smart Doll USB Hub.
While USB 2.0 is not lightning fast, its good enough to power your Android or iPhone.
You can use Smart Doll USB Hub to attach external video cameras...
...and also hard drives too.
The cutest looking USB hub I've personally seen ^^
You can also re:hub or attach another Smart Doll USB Hub to make Smart Doll Ception.
You can also be one of those otaku on Amazon Japan who like to plug in these devices to show the power throughput too.
When not in use you can cover up the ports - or pull down the T-shirt ^^
With Smart Doll Hub you can indulge in some yuri-yuri shenanigans.
We also have a Smart Doll USB Hub for the guys too but cos their torso is longer, they get 3 ports.
Eiji charging my iPhone and copying files.
And just like the Smart Doll girls...
you can also indulge in some BL USB shenanigans.
If you already have a Smart Doll then you can either order a body and buy the add-on or do it yourself - its simple (kinda).
First off you need to find a USB hub that fits inside the torso - USB 2.0 hubs are usually smaller than USB 3.0 hubs. Then you need to cut slots for the USB ports like so. Its best to use a hairdryer to heat the shell before cutting.
The hub I chose was the ELECOM U2H-TZ410BBK. I only used two ports because the torso curves inwards at the top which means that I cant have all 3 ports flush with the surface.
If you are ordering this option, do note that you cant change the hub to another brand or type - also make sure to check the specs of the hub too.
For the sake of these photos I used cardboard to hold the hub in place but for the version we send out we will use something more stable.
Replace the bust part and done!
The cable from the hub should drape down the back of the torso like so.
And thats it! The Smart Doll USB Hub add-on is available from today for a limited period only or while stocks of that USB hub last. The add-on costs more than the hub cos we got to spend time cutting and installing the hub in the torso - first world problems eh.
And with the guys you get an extra port ^^